PTCOBALT10%

Cobalt(II)ethylhexanoate in Aliphatic Ester is produced in %10 concentrations.PTCOBALT  10 % is used as accelerator, in the curing process of Unsaturated Polyester (UP) RESINS AT room temperature with Organic Peroxides .Application concentration should be adjusted According to the type of resin and production method used.

دسته:

Description

Cobalt(II)ethylhexanoate in Aliphatic Ester is produced in %10 concentrations.

Specifications

Density (@20°c) 0,95 gr/cm³
Viscosity (@20°c) 354mPa.s
Appearnance violet blue
Diluent styrence,Toluene,TXIB
Other Solvents Aromatic Solvents and Pure Phthalates
PH Neutral
Cobalt Content 10 %
Flash Point 89 °c
CAS Nr 136-52-7
EINECS/ELINCS Nr 205-250-6

Applications

PTCOBALT  10 % is used as accelerator, in the curing process of Unsaturated Polyester (UP) RESINS AT room temperature with Organic Peroxides .Application concentration should be adjusted According to the type of resin and production method used.

Usage & Amount

It is recommended to use 1% – 2% in general ,depending on

Application

Accelerators should be kept away from direct Contact with Organic Peroxides during applications with Polyester resins.

Packaging

20 &  3 & 1 kgs
180 kgs

Handling & Storage

Recommended storage temperature is between +5 C and +30 C . Keep pails tightly closed. Store and handle in a dry ,well-ventilated Place. Keep away from sources of heat,ignition and direct sunlight in Original packaging. Provide grounding and venting on order to prevent Static electricity build-up. Aoide any contact with Organic Peroxides.

Shelf Life

1 year.

نقد و بررسی‌ها

هیچ دیدگاهی برای این محصول نوشته نشده است.

اولین کسی باشید که دیدگاهی می نویسد “PTCOBALT10%”

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

به بالای صفحه بردن